Skip to main content

Posts

Showing posts with the label DTH

What to do when your DTH show "No Signal"?

For the last 15 days, There was "No signal" message on many of the Tatasky channels. Frankly speaking, pathetic service by customer care. Finally, today a technician came with Digital signal finder and two spanners. Saw the signal, went up to the disk, opened some bolts and set signal tester between lines and saw signal quality and set disk such that signal quality sets above 75. Done, they took 200/- for this 5 minute solution.  
An idea stuck to my mind, why to pay every time when we get "No Signal"? let us set a method in which way you yourself can solve the "No Signal" problem.
These are the indications that you have to realign the disk.  1. "No Signal" message.  2. Check out signal quality if you find the above shown "No Signal" message. If your signal quality is less than 75, you are in need of realignment of disk. Thing you need for realignment are:
Wrench or Spanner. theseDigital Signal Finder. If you have not these things, cli…

How to program Tatasky remote to work for TV?

Now you don't need to have two remotes to operate TV and Tata sky. To make Tata Sky remote work for your TV, just press univ button on your Tata Sky remote and use it as a TV remote.Functions that can be used with tatasky remote includes on/off, mute, volume and input mode.
To program Tata sky remote to work for TV, follow the following steps. 1. Press and hold select+2 button on Tatasky remote until LED blinks twice. Your Tatasky remote is now on learning mode. 2. Put Tatasky remote and TV remote 5cm apart and in front of each other such that LED of both the remote face each other. 3. Press Volume+ button in Tatasky remote, then on TV remote. Tatasky remote will blink twice.  4. Your volume+ key is programmed. Repeat step 3 for all the other keys viz. Volume-, power,mute,source buttons. 5. Press select button to come out of learning mode.
Enjoy.